PRO 4 REMOTE PROGRAMMING INSTRUCTIONS

1. Hold the two large buttons down together for 20 seconds until the LED starts to flash then release. (your remote is now ready to be programmed.)
   
   
2. Using the remote you wish to copy, point it at the PRO 4 and press the desired button and hold down.
   
   
3. Press the button on the PRO 4 that you wish to program and hold down at the same time until the LED on the PRO 4 Flashes continuously.
   
   
4. Release Both of the buttons.
   
   
5. Your remote is now programmed.
   
   
6. Repeat from step 2 for all four buttons.